BMW HP2 Megamoto 2007, Rider'S Manual

Page: 76 / 133

Remove spacing sleeve 5 .
Installing front wheel
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
The front wheel must be
installed right way round to
rotate in the correct direction.
Observe the direction of rota-
tion arrows on the tires or on the
rim.
Install spacing sleeve 5 .
Roll front wheel into forks.
Insert axis 4 .
Tighten axle screw 2 to the
specified torque; if necessary
use a screwdriver to counter-
hold at the other side.
Axle screw of front wheel
in axle holder
Thread-locking compound:
Optimoly TA
30 lb/ft (40 Nm)
Without actuating brake: firmly
compress spring forks several
times.
Tighten the left-hand axle
clamping screws
1 with torque.
7
74
z Maintenance