BMW HP2 Megamoto 2007, Rider'S Manual

Page: 40 / 133

Remove the large screws 2
while holding the handlebars in
place.
Take off the upper clamping
blocks
3 .
Tilting the handlebars too
far can allow air to enter the
fluid reservoirs and make its way
into the hydraulic systems.
Hold the handlebars or lay them
down in such a way that the
reservoirs remain upright.
Remove the handlebars from
the lower clamping blocks.
Take off the lower handlebar
clamping blocks
4 .
Position the lower handlebar
clamping blocks
4 with the
threaded holes 5 facing toward
the rear.
Shorter distance to rider.
Position the lower handlebar
clamping blocks
4 with the
threaded holes 5 facing toward
the front.
Longer distance to rider.
Insert the lower handlebar
clamping blocks in the desired
position.
4
38
z Operation