BMW 8 Coupe Series, Owner'S Handbook Manual

Page: 227 / 390

To set the speed
Maintaining and saving the speed
While the system is interrupted, press the rocker
switch up or down once. The system is activa‐
ted.
The current speed is maintained and stored as
the desired speed.
The stored speed is displayed on the speedom‐
eter.
Dynamic Stability Control DSC is switched on, if
necessary.
The speed can also be stored by pressing the
button.
Press the button.
Changing the speed
Press the rocker switch repeatedly upwards or
downwards until the desired speed is set.
If the system is active, the displayed speed is
stored and the vehicle reaches the stored speed
when the road is clear.
▷ Each time the rocker switch is pressed to the
resistance point, the desired speed is in‐
creased or decreased by 1 km/h, 1 mph.
▷ Each time the rocker switch is pressed be‐
yond the resistance point, the desired speed
changes to the next multiple of 10 km/h on
the km/h display or the next multiple of 5 mph
on the mph display in the speedometer.
Hold the rocker switch in one position to repeat
the action.
Setting the distance
General
The distance setting is saved for the currently
used driver profile.
Safety note
WARNING
The system does not relieve you of your per‐
sonal responsibility. System limitations may
mean that braking is performed too late. There
is a danger of accidents or damage to property.
Pay close attention to the traffic conditions at
all times. Adapt the distance to traffic and
weather conditions, also comply with the pre‐
scribed safe distance by braking if necessary.
Reducing the distance
Press the button repeatedly until the
desired distance is set.
The selected distance, see page 228 , is dis‐
played in the instrument cluster.
Increasing the distance
Press the button repeatedly until the
desired distance is set.
The selected distance, see page 228 , is dis‐
played in the instrument cluster.
Seite 227
Driver Assistance Systems
CONTROLS
227
Online Edition for Part no. xxx - VI/18