BMW 8 Coupe Series, Owner'S Handbook Manual

Page: 272 / 390

Departure time
Principle
To ensure a pleasant interior temperature in the
vehicle at the start of the journey, it is possible to
set different departure times.
▷ One-off departure time: the time can be set.
System is switched on once.
▷ Departure time with day of the week: time
and day of the week can be set.
The system is switched on in good time be‐
fore the set departure time on the required
days of the week.
The departure time is preselected in two steps:
▷ Set departure times.
▷ Activate departure time.
Setting the departure time
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate comfort"
4. "Auxiliary ventilation" or "Auxiliary heating/
ventilation"
5. "Departure schedule"
6. Select the required departure time.
7. Setting the departure time.
8. Select the day of the week if necessary.
Using BMW display key
1. Switch on the display of the BMW Display
key.
2. "Precondit. setting"
3. Tap the symbol or the symbol.
4. Select the required departure time.
5. Setting the departure time.
6. Select the day of the week if necessary.
7. "OK"
Activating the departure time
Operating requirements
If a departure time is to influence activation of the
auxiliary heating/independent ventilation, the rel‐
evant departure time must be activated first.
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate comfort"
4. "Auxiliary ventilation" or "Auxiliary heating/
ventilation"
5. "Preconditioning for departure"
6. Activate the required departure time.
Using BMW display key
1. Switch on the display of the BMW Display
key.
2. "Precondit. setting"
3. Tap the symbol or the symbol.
4. Tap the symbol.
5. Activate the required departure time.
Display
, Symbol on the automatic air condition‐
ing system signals that a departure time has
been activated.
Standing air conditioning
via Remote Engine Start
Principle
Standing air conditioning cools or warms the in‐
terior to a comfortable temperature before start‐
ing to drive. In addition, the system cools, venti‐
lates or heats automatically depending on the
internal, external and set desired temperature.
Any snow and ice can be easier to remove.
Seite 272
CONTROLS
Climate
272
Online Edition for Part no. xxx - VI/18