BMW 8 Coupe Series, Owner'S Handbook Manual

Page: 228 / 390

Resuming Cruise Control
If Cruise Control is interrupted, it can be resumed
by calling up the saved speed.
Before calling up the saved speed, make sure
that the difference between the current speed
and the saved speed is not excessively large.
Otherwise, there may be inadvertent braking or
acceleration.
With the system interrupted, press the following
button on the steering wheel:
Without steering and lane control assis‐
tant.
With steering and lane control assistant.
Cruise Control is resumed with the saved values.
The saved speed value is deleted and can no
longer be called up in the following instances:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Switching between Cruise
Control with/without distance
control
Safety note
WARNING
The system does not respond to traffic travel‐
ling in front of you, but maintains the saved
speed. There is a danger of accidents or dam‐
age to property. Adjust the desired speed to
the traffic conditions and brake if necessary.
Switching the Cruise Control mode
Switch Cruise Control without distance control
on and off:
▷ Press and hold the button.
▷ Press and hold the button.
Without steering and lane control assistant:
switch on distance control:
▷ Press the button.
▷ Press the button.
With steering and lane control assistant: switch
on distance control:
Press the button.
A Check Control message is displayed after
switching.
Displays in the instrument
cluster
Display in the speedometer
▷ Green indicator: system is ac‐
tive, the indicator shows the
desired speed.
▷ Grey mark: system is interrup‐
ted; the mark shows the
stored speed.
▷ No marker: system is switched off.
Vehicle distance
The selected distance to the vehicle ahead is
displayed.
Symbol Description
Distance 1
Distance 2
Seite 228
CONTROLS
Driver Assistance Systems
228
Online Edition for Part no. xxx - VI/18