BMW 5 Series GranTurismo Owner'S Manual Download Page 61

Page: 61 / 240

Deactivating

Slide the mirror changeover switch to the pas‐
senger's side mirror position.

Fold in and out

Press the button.

Possible up to approx. 15 mph/20 km/h.
For example, this is advantageous

▷

In car washes.

▷

In narrow streets.

▷

For folding back mirrors that were folded
away manually.

Mirrors that were folded in are folded out auto‐
matically at a speed of approx. 25 mph/40 km/h.

Fold in the mirror in a car wash
Before entering an automatic car wash,

fold in the exterior mirrors by hand or with the
button; otherwise, they could be damaged, de‐
pending on the width of the vehicle.◀

Automatic heating

Both exterior mirrors are automatically heated
whenever the engine is running.

Automatic dimming feature

Both exterior mirrors are automatically dimmed.
Photocells are used for control in the Interior rear
view mirror, refer to page

Interior rearview mirror

Reducing the blinding effect

From behind when driving at night: turn the
knob.

Interior rearview mirror, automatic

dimming feature

The concept

Photocells are used for control:

▷

In the mirror glass.

▷

On the back of the mirror.

Functional requirement

For proper operation:

▷

Keep the photocells clean.

▷

Do not cover the area between the inside
rearview mirror and the windshield.

Seite 61

Adjusting

Controls

Online Edition for Part no. 01 40 2 917 498 - II/13

Summary of Contents for 5 Series GranTurismo

















































































































































































































































Search results

Summary of Contents for 5 Series GranTurismo

Reviews:

Related manuals for 5 Series GranTurismo

Brands by name

Popular brands

BMW 5 Series GranTurismo, Owner'S Manual

Search results

Summary of Contents for 5 Series GranTurismo

Reviews:

Related manuals for 5 Series GranTurismo

Brands by name

Popular brands