BMW 5 Series GranTurismo Owner'S Manual Download Page 147

Page: 147 / 240

▷

When parking in parking spaces on the driv‐
er's side, the corresponding turn signal must
be set.

Suitable parking space

▷

Gap between two objects with a minimum
length of approx. 5 ft/1.5 m.

▷

Minimum length of the gap: own vehicle's
length plus approx 4 ft/1.2 m.

▷

Minimum depth: approx. 5 ft/1.5 m.

For parking procedure

Closed doors.

At a glance

Button in the vehicle

Parking assistant

Ultrasound sensors

The ultrasounds sensors used to measure park‐
ing spaces are located in the side turn signals.
To ensure full operability:

▷

Keep the sensors clean and free of ice.

▷

When using high-pressure washers, do not
spray the sensors for long periods and main‐
tain a distance of at least 12 in/30 cm.

Switching on/off

Switching on with the button

Press the button.
The LED lights up.

The current status of the parking space search
is indicated on the Control Display.

Parking assistant is activated automatically.

Switching on with reverse gear

Shift into reverse.
The current status of the parking space search
is indicated on the Control Display.
Activate: "Parking Assistant" Select the
symbol in the Control Display.

Switching off

The system can be deactivated as follows:

▷

Press the button.

▷

Switch off the ignition.

Display on the Control Display

Activating/deactivating the system

Symbol Meaning

Gray: the system is not available.
White: the system is available but not
activated.

The system is activated.

Seite 147

Driving comfort

Controls

147

Online Edition for Part no. 01 40 2 917 498 - II/13

Summary of Contents for 5 Series GranTurismo

















































































































































































































































Search results

Summary of Contents for 5 Series GranTurismo

Reviews:

Related manuals for 5 Series GranTurismo

Brands by name

Popular brands

BMW 5 Series GranTurismo, Owner'S Manual

Search results

Summary of Contents for 5 Series GranTurismo

Reviews:

Related manuals for 5 Series GranTurismo

Brands by name

Popular brands