BMW 5 Series GranTurismo Owner'S Manual Download Page 38

Page: 38 / 240

Doors

Automatic Soft Closing

To close the doors, push lightly.
It is closed automatically.

Danger of pinching
Make sure that the closing path of the

doors is clear; otherwise, injuries may result.◀

Tailgate

Opening

Opening the large tailgate

Note the opening height of the tailgate
The tailgate pivots back and up when it

opens. Ensure that there is sufficient clearance
when the tailgate opens; otherwise, damage
may result.◀

▷

Press the button on the tailgate, arrow 1.

▷

Press the button on the remote
control for approx. 1 second.

▷

Push the button in the driver's foot‐
well.

The tailgate is opened if the vehicle is sta‐
tionary, provided that the tailgate has not
been locked.

Provide edge protection
Sharp or angular objects can hit the rear

window while driving and damage the heating
wires of the rear window. Provide edge protec‐
tion.◀

Opening the small tailgate

The tailgate pivots back and up when it opens.
Ensure that adequate clearance is available be‐
fore opening.

▷

Press the button on the tailgate, arrow 2.

Provide edge protection
Sharp or angular objects can hit the rear

window while driving and damage the heating
wires of the rear window. Provide edge protec‐
tion.◀

Closing

Recessed grips on the inside trim of the tailgate
can be used to conveniently pull down the tail‐
gate.

Seite 38

Controls

Opening and closing

Online Edition for Part no. 01 40 2 917 498 - II/13

Summary of Contents for 5 Series GranTurismo

















































































































































































































































Search results

Summary of Contents for 5 Series GranTurismo

Reviews:

Related manuals for 5 Series GranTurismo

Brands by name

Popular brands

BMW 5 Series GranTurismo, Owner'S Manual

Search results

Summary of Contents for 5 Series GranTurismo

Reviews:

Related manuals for 5 Series GranTurismo

Brands by name

Popular brands