manualshive.com logo in svg

BMW 5 Series GranTurismo, Owner'S Manual

The BMW 5 Series GranTurismo Owner's Manual is your comprehensive guide to unlock the full potential of this luxury vehicle. Experience seamless performance, cutting-edge technology, and unparalleled comfort with this exquisite car. Download your free manual from manualshive.com to explore every detail and optimize your driving experience.

Share
Download
background image

The storage compartment contains a switch for
separately securing the tailgate, refer to
page 

41

.

Replacing the battery

1.

Take the integrated key out of the remote
control.

2.

Push in the catch with the key, arrow 1.

3.

Remove the cover of the battery compart‐
ment; see arrow 2.

4.

Insert a battery of the same type with the
positive side facing upwards.

5.

Press the cover closed.

Take the used battery to a recycling cen‐
ter or to your service center.

New remote controls

You can obtain new remote controls from your
service center.

Loss of the remote controls

Lost remote controls can be blocked by your
service center.

Emergency detection of remote control

It is possible to switch on the ignition or start the
engine in situations such as the following:

▷

Interference of radio transmission to remote
control by external sources.

▷

Discharged battery in the remote control.

▷

Interference of radio transmission by mobile
devices in close proximity to the remote
control.

▷

Interference of radio transmission by
charger while charging items such as mobile
devices in the vehicle.

A Check Control message is displayed if an at‐
tempt is made to switch on the ignition or start
the engine.

Starting the engine with emergency

detection of the remote control

If a corresponding Check Control message ap‐
pears, hold the remote control, as shown,
against the marked area on the steering column
and press the Start/Stop button within 10 sec‐
onds while pressing the brake.

Personal Profile

The concept

You can set several of your vehicle's functions
to suit your personal needs and preferences.

▷

The settings are automatically saved in the
profile currently activated.

▷

The remote control used is detected when
the vehicle is unlocked and the stored profile
is called up.

▷

Your personal settings will be recognized
and called up again even if the vehicle has
been used in the meantime by someone else
with another remote control.

The individual settings are stored for three Per‐
sonal Profiles and one guest profile.

Seite 31

Opening and closing

Controls

31

Online Edition for Part no. 01 40 2 917 498 - II/13

Summary of Contents for 5 Series GranTurismo

















































































































































































































































Reviews:

No comments

Related manuals for 5 Series GranTurismo

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
Jabra TOUR Get Started preview
TOUR
Brand: Jabra Pages: 10
Federal Signal Corporation CommCenter D1 Series Installation And Service Instructions Manual preview
CommCenter D1 Series
Brand: Federal Signal Corporation Pages: 16
Code 3 21 COVERT Series Installation And Operation Instructions Manual preview
21 COVERT Series
Brand: Code 3 Pages: 16
Mobile Create MCM3 Instruction Manual preview
MCM3
Brand: Mobile Create Pages: 15
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
Code 3 WingMan Installation & Operation Manual preview
WingMan
Brand: Code 3 Pages: 8
Tessera4x4 SOT-1311 ROLL Installation Manual preview
SOT-1311 ROLL
Brand: Tessera4x4 Pages: 20
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
Menabo DELTA DL FIX 209FP Fitting Instructions Manual preview
DELTA DL FIX 209FP
Brand: Menabo Pages: 8
Volvo 2006 XC70 Owner'S Manual preview
2006 XC70
Brand: Volvo Pages: 211
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
Navman T1 F20 User Manual preview
T1 F20
Brand: Navman Pages: 10
Macrom EF-AR1-5561 Manual preview
EF-AR1-5561
Brand: Macrom Pages: 10
Phonocar VM 320 Instruction Manual preview
VM 320
Brand: Phonocar Pages: 28

Brands by name

Popular brands

Load more brands