BMW 5 Series GranTurismo Owner'S Manual Download

Page: 19 / 240

Example: setting the clock

Setting the clock

Press the button. The main menu is

displayed.

Turn the controller until "Settings" is high‐
lighted, and then press the controller.

If necessary, move the controller to the left
to display "Time/Date".

Turn the controller until "Time/Date" is high‐
lighted, and then press the controller.

Turn the controller until "Time:" is high‐
lighted, and then press the controller.

Turn the controller to set the hours and
press the controller.

Turn the controller to set the minutes and
press the controller.

Status information

Status field

The following information is displayed in the sta‐
tus field at the top right:

▷

Time.

▷

Current entertainment source.

▷

Sound output, on/off.

▷

Wireless network reception strength.

▷

Telephone status.

▷

Traffic bulletin reception.

Status field symbols

The symbols are grouped as follows.

Radio symbols

Symbol

Meaning

HD Radio™ is switched on.

Satellite radio is switched on.

Telephone symbols

Symbol Meaning

Incoming or outgoing call.

Missed call.

Wireless network reception strength
Symbol flashes: searching for net‐
work.

Wireless network is not available.

Bluetooth is switched on.

Roaming is active.

Seite 19

iDrive

At a glance

Online Edition for Part no. 01 40 2 917 498 - II/13

Summary of Contents for 5 Series GranTurismo

















































































































































































































































Search results

Summary of Contents for 5 Series GranTurismo

Reviews:

Related manuals for 5 Series GranTurismo

Brands by name

Popular brands

BMW 5 Series GranTurismo, Owner'S Manual

Search results

Summary of Contents for 5 Series GranTurismo

Reviews:

Related manuals for 5 Series GranTurismo

Brands by name

Popular brands