manualshive.com logo in svg

BMW 5 Series GranTurismo, Owner'S Manual

The BMW 5 Series GranTurismo Owner's Manual is your comprehensive guide to unlock the full potential of this luxury vehicle. Experience seamless performance, cutting-edge technology, and unparalleled comfort with this exquisite car. Download your free manual from manualshive.com to explore every detail and optimize your driving experience.

Share
Download
background image

Coolant

Vehicle equipment

All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not available in a vehicle,
e. g., because of the selected optional equip‐
ment or country variant. This also applies for
safety-related functions and systems.

General information

Danger of burns from hot engine
Do not open the cooling system while the

engine is hot; otherwise, escaping coolant may
cause burns.◀

Suitable additives
Only use suitable additives; otherwise, en‐

gine damage may occur. The additives are
harmful to your health.◀

Coolant consists of water and additives.
Not all commercially available additives are suit‐
able for your vehicle. Ask your service center for
suitable additives.

Coolant level

If there is no Min and Max mark in the filler neck
of the coolant reservoir, have the coolant level
checked if necessary by your service center and
add coolant as needed.

Checking

1.

Let the engine cool.

2.

Turn the cap of the coolant reservoir slightly
counterclockwise to allow any excess pres‐
sure to dissipate, and then open it.

3.

The coolant level is correct if it lies between
the minimum and maximum marks in the
filler neck.

4.

If the coolant is low, slowly add coolant up to
the specified level; do not overfill.

5.

Turn the cap until there is an audible click.

6.

Have the cause of the coolant loss elimi‐
nated as soon as possible.

Seite 205

Coolant

Mobility

205

Online Edition for Part no. 01 40 2 917 498 - II/13

Summary of Contents for 5 Series GranTurismo

















































































































































































































































Reviews:

No comments

Related manuals for 5 Series GranTurismo

RAM Commercial PROMASTER 2020 Quick Reference Manual preview
PROMASTER 2020
Brand: RAM Commercial Pages: 12
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Ultra-tow XTP Series Owner'S Manual preview
XTP Series
Brand: Ultra-tow Pages: 14
Mercedes-Benz 300D 2.5 1990 Owner'S Manual preview
300D 2.5 1990
Brand: Mercedes-Benz Pages: 121
Menabo BIKE PRO Fitting Instructions Manual preview
BIKE PRO
Brand: Menabo Pages: 8
Camtree G-51 Instruction Manual preview
G-51
Brand: Camtree Pages: 5
JANE StrataPlatform Instructions Manual preview
StrataPlatform
Brand: JANE Pages: 58
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
Streetwize SWGH3 Quick Start Manual preview
SWGH3
Brand: Streetwize Pages: 4
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
QA1 GS501 Installation Instructions preview
GS501
Brand: QA1 Pages: 3
Kolpin 1466 Product Instructions preview
1466
Brand: Kolpin Pages: 6
Mercedes-Benz GLC 2020 Operator'S Manual preview
GLC 2020
Brand: Mercedes-Benz Pages: 66
Fiat FIORINO Owner'S Handbook Manual preview
FIORINO
Brand: Fiat Pages: 220
Navman F-Series B2+ User Manual preview
F-Series B2+
Brand: Navman Pages: 10
Cruiser Consoles BUSHMAN 15L ROADIE fridge Base console Installation Instructions Manual preview
BUSHMAN 15L ROADIE fridge Base console
Brand: Cruiser Consoles Pages: 6

Brands by name

Popular brands

Load more brands