BMW Motorrad HP2 Megamoto, Rider'S Manual, Page: 43 / 146

Slide protective cap over
threaded fastener.
Handlebars
Adjustable handlebars
The distance of the handlebars
from the rider can be adjusted by
turning the handlebar clamping
blocks by 180°.
Short-reach position, handlebars
toward rider.
Long-reach position, handlebars
away from rider.
Adjusting handlebars
Make sure ground is level and
firm and park motorcycle.
Remove the small screws 1 .
Tilting the handlebars too
far can allow air to enter the
fluid reservoirs and make its way
into the hydraulic systems.
Hold the handlebars or lay them
down in such a way that the
reservoirs remain upright.
Remove the large screws 2
while holding the handlebars in
place.
Take off the upper clamping
blocks
3 .
Remove the handlebars from
the lower clamping blocks.
4
41
z Op
er
at
io
n
ProCarManuals.com