BMW Motorrad HP2 Megamoto Page 81 Rider'S Manual Download

Page: 81 / 146

Brake pad wear

The rear brake has a brake-pad
wear indicator.

with three marker rings

is between the brake pads.

How to interpret the marks:

Three rings visible: brake-pad
thickness is at least 75 %
Two rings visible: brake-pad
thickness is at least 50 %
One ring visible: brake-pad
thickness is at least 25 %
No rings visible: brake pads
worn to wear limit; check as
described above

Brake fluid

Checking front brake fluid
level

A low fluid level in the
brake reservoir can allow air

to penetrate the brake system.
This significantly reduces braking
efficiency.
Check brake fluid level
regularly.

Make sure ground is level and
firm and park motorcycle.
Move handlebars into straight-
ahead position.

Read off brake fluid level at
reservoir

The brake fluid level in the
brake-fluid reservoir drops

due to brake pad wear.

Maint

nance

ProCarManuals.com

Summary of Contents for HP2 Megamoto



















































































































































Search results

Summary of Contents for HP2 Megamoto

Reviews:

Related manuals for HP2 Megamoto

Brands by name

Popular brands

BMW Motorrad HP2 Megamoto, Rider'S Manual

Search results

Summary of Contents for HP2 Megamoto

Reviews:

Related manuals for HP2 Megamoto

Brands by name

Popular brands