BMW Motorrad HP2 Megamoto, Rider'S Manual

Page: 60 / 146

Phase 1
Checking the diagnosable
system components while
stopped.
ABS warning light flashes.
Possible country-specif-
ic version of ABS warning
light.
Phase 2
Checking wheel sensors while
starting off.
ABS warning light flashes.
Possible country-specif-
ic version of ABS warning
light.
ABS self-diagnosis
completed
The ABS warning light goes
out.
If an ABS fault is indicated after
the ABS self-diagnosis is com-
pleted:
Continue driving is possible. It
must be noted that the ABS
function is not yet available.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Running in
The first 600 miles
(1,000 km)
While running in the motorcy-
cle, vary the throttle opening
and engine-speed range fre-
quently.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing high-speed main roads and
highways if possible.
Exceeding the specified en-
gine speeds while running
in will lead to increased engine
wear.
Adhere to the specified engine
run-in speeds.
Do not exceed the engine run-
in speeds.
Engine break-in speed
<4000 min
-1
Do not accelerate at full throt-
tle.
Avoid low engine speeds at full
load.
After 300 - 750 miles (500 -
1,200 km), have the first in-
spection performed.
Brake pads
New brake pads must "bed
down" and therefore do not
achieve their optimum friction
levels during the first 300 miles
5
58
z Riding
ProCarManuals.com