![background image](http://html.mh-extra.com/html/bmpro/aspero/aspero_owners-manual_2779807015.webp)
15
1.
Water Tank Levels
Displays the current water tank levels measured by connected BMPRO Dippers.
Blue LEDs indicate the water level of the tank.
NOTE
: The ASDisplay cannot distinguish between clean and grey water tanks., it
can only display water levels. You must make note of which tanks are grey water
tanks yourself.
2.
Pump 2 Button
Turns water pump 2 on or off.
A green LED means the pump is running, no LED means the pump is not running.
For more information, refer to
3.
Pump 1 Button
Turns water pump 1 on or off.
A green LED means the pump is running, no LED means the pump is not running.
For more information, refer to
4.
ECO Mode Button
Turns ECO Mode on or off, which turns off all outputs on the ASPower except
output 14.
A green LED means ECO Mode is on, no LED means ECO Mode is off.
NOTE
: This will look similar to the ASDisplay being powered off, except the ECO
Mode LED will be on.
For more information, refer to
.
5.
Power Button
Turns the ASDisplay on or off. All LEDs will be off, however this will not affect the
functionality or state of the ASPoower.
A green LED means the ASDisplay is on, no LED means the ASDisplay is off.
NOTE
: This ASDisplay will turn itself off after 24 hours if no buttons have been
pressed.
6.
Power Source
Displays whether power is coming from AC Mains, Auxillary, Solar or multiple
sources. The active sources are indicated with a green LED.
7.
Charging / Discharging Status
Displays if the battery connected to the ASPower is charging or discharging. The
current status is indicated with a green LED.