20
WARNING
Sparks have the potential to cause an explosion should combustible gases be
present. The following procedures are designed to minimise the risk of spark
generation when connecting or disconnecting the battery. The positive terminal of
the battery must not be connected to the chassis.
WARNING
Before using a battery other than that which was installed at the caravan dealership,
consult with the battery manufacturer for a detailed description of the installation,
uses and maintenance of the battery. Verify that the type and capacity of the battery
or batteries used are compatible for use with the ASPower.
CONNECTING A BATTERY TO THE ASPOWER
To connect a battery to the ASPower and ensure the system is wired correctly:
1.
Power off all loads connected to the ASPower. The simplest way is with the
switch connected to the ASPower Load Isolation input.
2.
Turn off the ASPower and remove the battery fuse and all power sources
(mains/solar/AUX).
3.
Remove the battery fuse on the ASPower.
For the location of the fuse, refer to the
4.
Connect the battery’s positive (red) terminal from the ASPower Batt+
connection point.
5.
Connect the battery’s negative (black) terminal from the ASPower Batt-
connection point.
6.
Reinsert the battery fuse.
7.
Reconnect the mains/solar/AUX.
You are now ready to make your system live.
