27
Figure 5:
Battery Capacity set to 450Ah
Battery Capacity Example
1
2
1.
Battery Level LEDs
Each flashing Battery Level LED represents 10Ah. In this case, 5 LEDs are
flashing, representing 50Ah.
2.
Water Tank Level LEDs
Each flashing Water Tank Level LED represents 100Ah. In this case, 4 LEDs are
flashing, representing 400Ah.
Adding the two together, 5 flashing Battery Level LEDs and 4 flashing Water Tank
Level LEDs represents 450Ah.
Setting Battery Capacity
To set the battery capacity of the battery connected to the ASPero system:
1.
On the ASDisplay, hold down the Power Button for three seconds to enter
Settings Mode.
The Power Button LED will flash when you have entered Settings Mode.
2.
Press the P1 Button to decrease the battery capacity.
3.
Press the P2 button to increase the battery capacity.
NOTE
: The battery capacity will be adjusted in increments of 10Ah. The
minimum battery capacity is 50Ah and the maximum battery capacity is
600Ah.
4.
Press the Power Button to exit Settings Mode and save your selection.
