BPAP System User Manual
44 / 57
Transfer Box
Fig. 18-2
(2)
Cleaning the Transfer Box:
Rinse the transfer box throughly in clean water. You may
also clean the transfer box with a soft cloth which will not scratch it (dip the soft cloth in
liquid soap if necessary). Rinse the transfer box thoroughly, and then wipe it dry with a soft
cloth.
(3)
Putting the Transfer Box back:
as shown in Fig. 18-3.
Transfer Box
Fig. 18-3
CAUTION!
• It is recommended to clean the transfer box once a week.
18.5 Cleaning the Enclosure
Wipe the surface of the device with a soft, slightly damp cloth.
CAUTIONS!
• The device can only be used after the enclosure is dry, so that no moisture enters the
device.
• It is recommended to clean the
enclosure once a week.
18.6 Cleaning the Tubing
(1) Remove the tubing from the device and mask before cleaning.
(2) Clean the tubing in warm water which contains washing liquid, and then rinse it in clean
water thoroughly.
(3) After cleaning, air-dry the tubing in a cool, well-ventilated area, and avoid direct sunlight.
It takes approximately 30 minutes to completely air-dry the tubing. Check whether the
tubing is completely dry before re-use.
CAUTION!
• It is recommended to clean the tubing once a week.
Summary of Contents for G3 B20A
Page 61: ...391170 ...