BMC G3 B20A, User Manual, Page: 25 / 61

BPAP System User Manual
22 / 57
12.4 Heating the Water
Pay attention to the number next to the icon when using the humidifier. The number
indicates the On / Off state of the humidifier. It is off when the number next to the icon is 0.
CAUTION!
• Observe the water level in the water chamber before using the humidifier. Make sure there
is sufficient water in the water chamber, and avoid heating the device with an empty water
chamber.
12.5 Using the Ramp Feature
Every time the feature is enabled, the pressure will drop to the initial pressure, and then
gradually rise to the prescribed treatment pressure according to the preset ramp time, so as
to make it easy for the patient to fall asleep. The screen displays a real-time countdown of
the remaining ramp time in minutes.
CAUTIONS!
• You can use the ramp feature as often as you wish during sleep.
• The ramp feature is not prescribed for all users.
12.6 Accessing the iCode
After the device is powered on, move the cursor to the icon by turning the Knob ,
as shown in Fig. 12-1. Access the iCode information by pressing the Knob , the screen
displays the iCode Interface, as shown in Fig. 12-2.
Fig. 12-1
Fig. 12-2