BMC G3 B20A, User Manual, Page: 35 / 61

BPAP System User Manual
32 / 57
Fig. 16-2
Fig. 16-3
Note: The above interface is only applicable to devices that do not have the modes of
SmartC, SmartA or SmartB activated. If SmartC, SmartA or SmartB is enabled, the symbol
will appear in the status bar at the top of the screen, as shown in Fig. 16-4.
Fig. 16-4
The first icon on the upper part of the screen is the Preheat Function Icon, the second
icon indicates Accessories, the third icon is the Mask Setup Icon, the fourth icon
is the Report Interface Icon, the fifth icon is the Initial Setup Icon . As you turn the
Knob , the cursor will switch among the five icons.
Note: As the humidity is turned off, the Preheat Function Icon will turn gray, as shown in
Fig. 16-4.
16.1.2 Bringing up the Initial Setup Interface
After the screen displays the Main Interface shown in Fig. 16-1, turn the Knob . When
the cursor is on the icon , press the Knob , and the screen displays the Initial Setup
Interface of the Patient Menu, as shown in Fig. 16-5.