Blunik Trip II PLUS, Manual

Page: 26 / 61

BLUNIK II PLUS INSTRUCTIONS
· 25 ·
Only if the stage has been programmed in JP mode.
+info: IMPOSED MEASURES MODE (JP) — page:049
Only if the stage has been programmed in RB mode.
+info: ROAD BOOK MODE — page:047
Only if the stage has been programmed in COPY
mode.
Only if the stage has been programmed in LEARN
mode.
5.5. ACTIONS WITH BLUNIK ACTIVE – TIMED SECTION
5.5.1. Distance corrections
While we are with BLUNIK Active , normally the first kilometres are the
Timed sector . From the end of the Timed sector we find ourselves in a link.
During the whole sector, but mainly in the Timed sector we must verify
that our Actual total distance is correct.
At certain points of the Road Book we can press and the screen will
display the distance at that point for 5 seconds (Freeze) . If we consider it
necessary to correct it, we can use the buttons:
During the link, if we have programmed an average, we can have control over
out schedule.
+info: DISTANCE CORRECTIONS — page:043
5.5.2. Our route errors
In the event of our error on the route, we have the option to stop the distance
count or count in reverse. By pressing we access different counting
modes.
JP TABLES
COPY
LEARN