Blunik Trip II PLUS, Manual

Page: 33 / 61

· 32·
Saved in the memories are:
The parameters of the CALIBRATION screen.
The parameters of the SENSOR ACTIVATION screen.
The parameters of the SENSOR CONNECTION screen.
6.5. DATA VALIDATION
We do not normally need to validate the data that we input into the BLUNIK.
It is recorded exactly as entered.
If we have not varied anything, nothing changes. If we change data, it stays
changed.
There are only a few cases where we have to validate the data by pressing
To synchronise the clock.
To change the counting mode with
Too add or subtract distances with
In these cases works like the ESCAPE key on a computer if we don’t
wish to execute the function.
6.6. CHANGE THE INTENSITY OF THE NOCTURNAL LIGHT
Only with BLUNIK Inactive :
From the Parameters screen the light level that we wish to use at night can
be adjusted.
The level goes from 1 to 5.
Bl Blue light.
Gr Green light.
Re Red light.
Sc BLUNIK screen.
Ac accessory screens.
You can always change from DAY to NIGHT by pressing repeatedly.