Blunik Trip II PLUS, Manual

Page: 32 / 61

BLUNIK II PLUS INSTRUCTIONS
· 31 ·
Each time we correct a distance we are recognising that we are going a
bit wrong. It is better to try to modify our calibration or our SPORT DRIVE
percentage so as to minimise corrections.
The SPORT CALCULATOR can help us with these corrections.
The BLUNIK II, without us noticing:
Compensates for the bad measurement of the sensors when our car
lifts a wheel or when it skids or locks.
Controls that the sensors are operating correctly at all times.
6.3. HOW TO SYNCHRONISE THE CLOCK
Only when we are in BLUNIK Inactive , enter the parameter programming
by pressing
By using a we set a
future time.
Synchronise with / Do not synchronise with
If we only wish to adjust the tenths, we enter the parameter programming
by pressing
By pressing we access the fine adjustment
mode.
By pressing we can directly modify the
tenths of a second (it takes a while to adjust).
We exit this screen by pressing or with
6.4. MEMORIES
So that the BLUNIK II can be used with different sets of tyres or different
vehicles, it has 4 memories: A B C D.
Only from the Calibration screen can the selected
memory be chosen.
CLOCK
CLOCK
ADJUST CLOCK
CALIBRATION