BLUNIK II PLUS INSTRUCTIONS
· 13 ·
* Let’s start by studying the functions of the keys (there are only 12).
By using BLUNIK we can forget about the ‘fear’ of pushing buttons. In very
few cases can the erroneous pressing of a BLUNIK II button cause a serious
error and even if it does, there is always a way of fixing it, if we understand
the BLUNIK well.
We can trust our BLUNIK device. It is very reliable and is designed so that we
don’t go wrong for silly mistakes like forgetting to press
ENTER.
The buttons need pushing when it’s logical to push them. The BLUNIK will
never call us stupid for making the mistake of not pushing a button!
3.1. BUTTON ACTIONS
Turn the device on with the button.
Turn the device off by holding the
button until it turns off.
BUTTON
To access the programming of the parameters.
To move from one parameter to the next we use
To go back to the previous parameter we use
We always finish parameter programming with
Within the parameter programming the following keys are also used:
BUTTON
To access the programming of the sectors.
To move from one screen to the next we use
To return to the previous we use
We always finish sector programming with
Within the sector programming the following keys are also used:
Summary of Contents for Trip II PLUS
