Blulog TDL2 Data Logger
7
notifications. You can also apply the new notification
definition for all zones (by selecting "
All other zones
") but
for one specific type of alert (for example "
Temperature out
of range
")
Maintenance mode
Maintenance mode is used when data from loggers should
not be taken into account, e.g. for the maintenance of
equipment.
Go to the "
Loggers
" tab and click on the serial number of the
selected logger.
On the window that has been opened you can choose
“
Maintenance mode”
by clicking on the checkox.
End time of maintenance ca
n be set by choosing “
End of
maintenance”
Cyclic maintenance can also be set by selecting
“
Cyclic
maintenance mode”
Daily, weekly or monthly temperature reports
Go to the "
Users
" tab and click on the email address of the
selected user. From here, you can choose whether the user
should automatically receive daily, weekly or monthly
temperature reports via email for all loggers assigned to the
organization. You can also choose not to receive such
reports.