Blulog TDL2 Data Logger
10
In order to choose a manual start, just press the checkbox
“Manual start with button”.
For an instant start, just leave
this checkbox unchecked. For a delayed start, just press on
the
“Date of recording start”
or
“Delay of start of
record
ing”
field and select your date and time or number of
minutes.
For a delayed start you have an option to start a recording at
a specific date and time or after
“x”
number of minutes. You
can choose between these 2 options inside
“Settings”.
Next press the
“Start new recording”
button to confirm and
place your device in contact with the data logger.
(Only available in TDL2 Data Loggers)
If you chose the
manual start, press the
“PUSH START”
button on the logger
for around 5 seconds until you see diode blinking.
Stop Recording
To stop the recording click on the
“Stop recording”
button
and place data logger near your device to complete the
operation.
If your data logger is multiuse, you can start another
recording with new parameters.
Restart Recording
If you want to start a new recording using the same
parameters, click on the
“Restart recording”
button instead
of the
“Stop recording”
button. Place data logger near your
device to complete the operation.
Access Recording Details
By pressing the
“Recording details”
button you will be
taken to the page where you can choose any of these 4
options:
“Temperature graph”,
“Share temperature
report”, “Upload data to cloud”
and
“Download PDF
report”.
