Bluff DuraSweeper DS-15-A-PERM Owner'S Manual And Installation Manual Download | Manualshive

Page: 52 / 53

background image

49

DuraSweeper

®

Bluff DuraSweeper

®

Snow Removal System Warranty

Bluff Manufacturing warranties our products to be free from defects in material and workmanship for

a period of one year from shipping date to original purchaser. Warranty eligibility requires all products

are used and serviced in accordance with the company’s recommendations, product selection guides,

product manuals and installation instructions.

Steel Structure: limited 10 year warranty
Brush motor: limited one year warranty
Brush: limited 6-month warranty
Electrical Panel: limited one-year warranty
Hoist Motor: limited one-year warranty

Bluff Manufacturing’s obligation under this warranty shall be limited to the repair, by Bluff Manufacturing

or a Bluff Manufacturing authorized technician, or exchange of any part of parts which may prove

defective under normal service within the time limitations set forth above, and which our examination

shall disclose to our satisfaction to be defective. Bluff Manufacturing requires the purchaser to send

date stamped photographs for initial review of warranty claim products.
This limited warranty does not cover any defects, malfunction or failure caused by or resulting from

improper or unauthorized service, maintenance, installation repair or use not in conformance or

accordance with Bluff Manufacturing’s recommendations, product selection guides, product manuals

or installation instructions and the intended use and capacities or specifications or from abuse, neglect,

accident, weather related issues or any other cause beyond the control of Bluff Manufacturing. This

limited warranty is made only to the original purchaser, which shall be deemed to mean that person or

organization to which the product is originally shipped or installed.
Bluff Manufacturing does not approve nor authorize any other person or entity to obligate Bluff

Manufacturing to any other liability not described herein concerning the sale of its products.
Bluff Manufacturing shall not be liable for any incidental or consequential damages. And liability

hereunder is expressly limited to repair or replacement of any part or parts which may prove defective

within the time prescribed hereon.
This warranty is expressly in lieu of all other warranties, expressed or implied, including the warranties

of merchantability and fitness for a particular purpose and all other obligations or liabilities on our part.

«
...
50
51
52
53
»

Summary of Contents for DuraSweeper DS-15-A-PERM






















































Reviews:

No comments

Related manuals for DuraSweeper DS-15-A-PERM

Brand: GALLERY Pages: 18

Brand: GE Pages: 242

Brand: GE Pages: 24

Brand: Balanced Body Pages: 3

Brand: Sagola Pages: 8

Brand: ACE INSTRUMENTS Pages: 15

Brand: Wave Fitness Pages: 15

ABS-Lock DH04 Series

Brand: ABS Pages: 4

Brand: KaVo Pages: 49

Brand: Easson Pages: 33

Brand: NANLUX Pages: 39

Brand: Kamikaze Pages: 112

Brand: KAM Pages: 2

Brand: Nabtesco Pages: 26

Brand: Hach Pages: 456

Brand: JBM Pages: 13

FUSION Equine DR II

Brand: SOUND Pages: 178

Brand: Erbe Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands