BlueBox IDTRONIC GEN2 ADVANT UHF, Manual, Page: 82 / 102

BLUEBOX Advant UHF Page 82 of 102
9 Document Revision History
Date Revision Description
28/07/14 1.04 First release.
23/04/15 1.05
Added the ordering codes of the new 1 internal / external
antenna readers 5221U-S, 5222U-S, 5223U-S, 5237U-
S, 5238U-S and 5239U-S in the whole document.
Minor corrections in the whole document.
Corrected the max RF power and the reading distance of
the 1 internal / external antenna readers in section 2.
Corrections in the LEDs behavior in section 5.
Added the mechanical drawings section (section 6).
Added the installation section (section 7).
24/09/15 1.06
Replaced the table of the ordering codes in section 1.
Added the RF input sensitivity in electrical features tables
in section 2.
15/06/16 1.07
Replaced cross reference table between connection pin
number and the color of the wires of a standard open
ended cable in sections 5.1, 5.2, 5.3, 5.4, 5.5 and 5.6.
02/09/16 1.08
Added the reader’s firmware versions object of this
manual.
Changes in the technical specification formatting
(section 2).
Added the operating features and description of the
configurable parameters (section 3).
Added the .gsd file as appendix C and moved the .inf file
in appendix B and the driver installation on Windows 8
OS description in appendix D.
Added the regions of operation in appendix A.
30/09/16 1.09
Updated the reader’s firmware versions object of this
manual.
Added Q selection algorithm, Q initial, Q final, Q adjust
rounds and inventory cycles parameters in EPC C1G2
configuration (section 3.2.4).
04/08/17 1.10
Added the reader’s firmware versions object of this
manual.
Added the test modes description and auto antenna
tuning description in operating features section.
Corrections in operating features section.
Added the RF chip standby mode in RF parameters.