BlueBox IDTRONIC GEN2 ADVANT UHF, Manual

Page: 31 / 102

BLUEBOX Advant UHF Page 31 of 102
Parameter Description
Input1 Mode
Input 1 activation / deactivation mode of the ‘continuous’ mode in ‘trigger’ mode:
• 0x00: Disabled
• 0x01: ON -> Activate antennas; OFF -> Deactivate antennas
• 0x02: OFF -> Activate antennas; ON -> Deactivate antennas
Input2 Mode
Input 2 activation / deactivation mode of the ‘continuous’ mode in ‘trigger’ mode:
• 0x00: Disabled
• 0x01: ON -> Activate antennas; OFF -> Deactivate antennas
• 0x02: OFF -> Activate antennas; ON -> Deactivate antennas
Extension
Time
‘Continuous’ mode activation/deactivation management with inputs extension time.
• In ‘trigger’ mode, if =0 the trigger is level sensitive, otherwise it is edge
sensitive and this time defines the ‘continuous’ mode activat
ion time
extension.
• In ‘gate’ mode it defines the ‘continuous’ mode activation time extension
after the crossing of the gate.
And the values allowed are:
• Decimal 0 … 99 for time in seconds (0 … 99 seconds);
• Decimal 100 … 199 for time in minutes (0 … 99 minutes).
Gate Time
The maximum gate crossing time. If =0 the ‘gate’ mode is disabled, otherwise it is
the maximum gate crossing time:
• Decimal 0 … 99 for time in seconds (0 … 99 seconds);
• Decimal 100 … 199 for time in minutes (0 … 99 minutes).
Debounce
Time
The inputs anti-bounce time. If =0 a minimum bounce time of 50ms is internally set.
• Decimal 0 … 99 for time in mseconds (0 … 990 mseconds)
• Decimal 100 … 199 for time in seconds (0.0 … 9.9 seconds)
The changed input/output parameters become effective only after
a reset of the
BLUEBOX . Reset the BLUEBOX using the ‘Reset
Device’ command or via a hardware reset.
3.2.4 RF and EPC C1G2 (Class-1 Generation-2)
Hereinafter the configurable RF parameters of the BLUEBOX .
Parameter Description Range Default
RF Region RF geographical region.
Europe (ETSI
compliant
region), North
America (FCC
compliant
region)
Europe (ETSI
compliant
region)