BlueBox IDTRONIC GEN2 ADVANT UHF, Manual, Page: 30 / 102

BLUEBOX Advant UHF Page 30 of 102
Parameter Description Range Default
extension after the crossing of the
gate.
Gate Time
Maximum gate crossing time. If =0 the ‘gate’
mode is disabled, otherwise it is the maximum
gate crossing time.
0 … 99
seconds
0 … 99
minutes
0
Debounce
Time
The inputs debounce time. If =0 a minimum
bounce time of 50ms is internally set.
0.00 … 0.99
seconds
0.0 … 9.9
seconds
0
Where the input mode range means
• 0: Disabled;
• 1: ON -> Activate antennas; OFF -> Deactivate antennas;
• 2: OFF -> Activate antennas; ON -> Deactivate antennas;
The input 1 and 2 modes combination allowed are
Input 1 Mode Input 2 Mode
ON -> Activate antennas; OFF -> Deactivate
antennas
Disabled
OFF -> Activate antennas; ON -> Deactivate
antennas
Disabled
Disabled
ON -> Activate antennas; OFF -> Deactivate
antennas
Disabled
OFF -> Activate antenna 1 & 2; ON ->
Deactivate antenna 1 & 2
The input/output parameters are stored in configuration page nr. 0x05 and are
managed through the ‘Read Configuration Parameters’ and ‘Write Configuration
Parameters’ commands as described in protocol technical manuals where the
parameters 1…7 fields with default values are:
1 2 3 4 5 6 7
Input1
Mode
Input2
Mode
Extension
Time
Gate Time
Debounce
Time
0x00 0x00
0x01 0x00 0x00 0x00 0x00 0x00 0x00
Where: