BlueBox IDTRONIC GEN2 ADVANT UHF, Manual, Page: 26 / 102

BLUEBOX Advant UHF Page 26 of 102
The general parame ters are managed through the ‘Read General Parameters’
and ‘Write General Parameters’ commands as described in protocol technical
manuals where the parameters 1…7 fields with default values are:
1 2 3 4 5 6 7
Device
Address
Serial1 Serial2 0x00 0x00 Filter Time Flags
0xFF 0x48 0x10 0x00 0x00 0x01 0x80
Where:
Parameter Description
Device
Address
Device address of the reader (0x00 … 0xFF).
Serial1
RS232/RS485 communication settings.
• High nibble: baud rate:
o
0x0: 1200 bps;
o
0x1: 2400 bps;
o
0x2: 4800 bps;
o
0x3: 9600 bps;
o
0x4: 19200 bps;
o
0x5: 38400 bps;
o
0x6: 57600 bps;
o
0x7: 115200 bps.
• Low nibble: data bits:
o
0x7: 7 bits;
o
0x8: 8 bits.
Serial2
RS232/RS485 communication settings.
• High nibble: stop bits:
o
0x1: 1 bits;
o
0x2: 2 bits.
• Low nibble: parity:
o
0x0: None;
o
0x1: Even;
o
0x2: Odd.
Filter Time
Reading management filter time (0 setting is internally overwritten with 1 second):
• Decimal 0 … 99 for time in seconds (0 … 99 seconds);
• Decimal 100 … 199 for time in minutes (0 … 99 minutes).
Flags
Flags. Single bits are dedicated to disable (0 value) or enable (1 value) functions:
• Bit 7: Automatic buzzer management;
• Bit 6: Automatic output 1 management;
• Bit 5: Reading antenna information in Data Request, Queue Request and
Inventory commands;