BlueBox IDTRONIC GEN2 ADVANT UHF, Manual

Page: 25 / 102

BLUEBOX Advant UHF Page 25 of 102
Items 5221U, 5222U, 5223U, 5237U, 5238U and 5239U are not
covered by this section! See B5U020xxxE and B5U021xxxE
manuals operating features and configuration details.
3.1 General Parameters
Hereinafter the configurable general parameter of the BLUEBOX .
Parameter Description Range Default
Device Address Device address of the reader. 000 … 255 255
Baud Rate
Communication baud rate on RS232 / RS485
interface.
1200, 2400,
4800, 9600,
19200, 38400,
57600, 115200
19200
Data Bits Data bits on RS232 / RS485 interface. 7, 8 8
Stop Bits Stop bits on RS232 / RS485 interface. 1, 2 1
Parity Parity on RS232 / RS485 interface.
None, even,
odd
None
Filter Time
Reading and tag queue management filter time.
0 setting is internally overwritten with 1 second.
0 … 99 seconds
0 … 99 minutes
1 sec
Buzzer
Management
Buzzer manage ment on ‘new tag’ event.
Disabled,
enabled
Enabled
Output 1
Management
Output 1 management on ‘new tag’ event.
Disabled,
enabled
Disabled
Reading
Antenna
Information
Reading antenna information.
Disabled,
enabled
Disabled
Transponder
Type
Information
Transponder type information.
Disabled,
enabled
Disabled
‘Spontaneous’
Mode
‘Spontaneous’ message activation/deactivation.
Disabled,
enabled
Disabled
Trigger
‘Continuous’
Mode with
Inputs
‘Continuous’ mode activation/deactivation
management with inputs. See the Input/Output
parameters for more details.
Disabled,
enabled
Disabled
‘Continuous’
Mode
‘Continuous’ mode activation/deactivation. If
activated overrides the trigger ‘continuous’ mode
with inputs setting.
Disabled,
enabled
Enabled