BlueBox IDTRONIC GEN2 ADVANT UHF, Manual, Page: 42 / 102

BLUEBOX Advant UHF Page 42 of 102
Parameter Description
Q
Minimum and maximum Q value to be used in dynamic Q selection algorithm:
• High nibble: minimum Q value (0x0 … 0xF);
• Low nibble: maximum Q value (0x0 … 0xF).
Q Adjust
Rounds
Maximum Q adjust rounds in dynamic Q selection algorithm.
Inventory
Cycles
The inventory cycles in inventory command.
The changed ReadAfterDetect parameters become effective only
after a reset of the
BLUEBOX . Reset the BLUEBOX using the
‘Reset Device’ command or via a hardware reset.
3.2.5 Dynamic Power Management
Hereinafter the configurable dynamic power management parameters of the
BLUEBOX .
Parametro Descrizione Range Default
Mode
How the reader manages the power in
‘continuous’ mode.
Off, Up,
Up/down
Off
Power Step
The power step in dynamic power
management mode activated.
1 … 5 dB
10 … 500 mW
1 dB
Time Step
The time step in dynamic power management
mode activated. 0.1 … 9.9
seconds
1.0 sec
The dynamic power management parameters are stored in configuration page
nr. 0x07 and are managed through t
he ‘Read Configuration Parameters’ and
‘Write Configuration Parameters’ commands as described in protocol technical
manuals where the parameters 1…7 fields with default values are:
1 2 3 4 5 6 7
Mode Power Step Time Step 0x00 0x00 0x00 0x00
0x00 0x01 0x0A 0x00 0x00 0x00 0x00
Where: