Any operation. Any asset. Anywhere. ComCenter II User Guide v1.3
Page
20
of
32
© 2022 Blue Sky Network, All Rights Reserved
GENERAL USE
–
VOICE CALLS
SmartDial automatically identifies the country code and the correct number of digits required. Once
the digits are entered, dialing commences automatically. SmartDial de-activates itself when the
standard ‘00’ Iridium dialing sequence is detected; a ‘#’ is th
en required to initiate the call.
Placing a Call with POTS/RJ-11
Take the POTS/RJ-11 phone off-hook, listen for the dial tone, and then enter the country code, area
code, and phone number. SmartDial will automatically place the call when the correct number of
digits are entered, and you will hear the Iridium ‘boop’ sound
until the call connects.
Examples using SmartDial:
•
USA call: 1 (3-digit area code) (7-digit phone number)
•
Iridium ISU call: 8816 (8-digital phone number)
Examples bypassing SmartDial:
•
USA call: 011 (3-digit area code) (7-digit phone number) (# to send)
•
Iridium ISU call: 0118816 (8-digit phone number) (# to send)
Answering a Call with POTS/RJ-11
A POTS/RJ-11 phone connected to the ComCenter II will automatically ring when an incoming call is
pending. Simply take it off-hook to answer.
Placing a Call with Privacy Handset
Remove the Privacy Handset from the hang-up cup and listen for the dial tone. If the hang-up cup is
not used, press the OK button to toggle it on and off hook. When the dial tone is present, enter the
country code, area code, and phone number.
SmartDial will automatically place the call when the correct number of digits are entered, and you
will hear the Iridium ‘boop’ sound until the call connects.
Answering a Call with Privacy Handset
The Privacy Handset will automatically ring when an incoming call is pending. To answer, remove the
Handset from the hang-up cup and press the OK button.
