ComCenter II User Guide v1.3
Page
13
of
32
© 2022 Blue Sky Network, All Rights Reserved
COMMON WIRE CONNECTIONS
You may not need to make every accessory connection shown on this page. However, the below
steps are generally the most common and should be read carefully.
Attach External Antenna
The ComCenter II accepts a male TNC connector. Screw the antenna cable onto the ComCenter II
and tighten securely.
NOTE
: Do not exceed cable lengths listed in the
section. Keep cable splices to a
minimum.
Attach Power Input Jack
Align the pin of the cord with the receptacle and press the plug firmly in place. Twist the collar to
“lock” the cord to the ComCenter II.
NOTE
: The lock collar on this cable should be only tightened “finger
-
tight.” Do not use pliers, as this
will overtighten the cable and potentially damage the connector housing.
