-
-
(2) Click on the icon to pop-up the “Safely remove device” message, select
“USB Mass Storage Device”, and click on the “Stop” icon.
(3) “Stop a hardware device” dialogue, and click on the “OK” icon.
(4) There will be a message indicating that it is now safe to remove USB
Mass Storage Device. After that you can go ahead and unplug the USB cable
from the player.
In
Windows® 98SE
, you can unplug the USB cable immediately after the
data transferring finishes (when the indicator stops flashing). None of the above
steps is necessary.
▲CAUTION: Please follow the instructions when you disconnect your
player to the computer. Do not pull out the USB cable during data transferring,
or it may cause data loss or freezing of your player or computer.
6.10 USB-OTG
Please refer to 4.2.3for the procedure of connecting the USB cable to the
USB OTG cable. The player will enter the USB transfer interface automatically
and prompt you with the “start to copy” window, as shown in the picture:
Press the “Enter” button to start copying, a window will display “USB is
copying…” and the indicator will start flashing, which indicates the player is
copying all the contents in the USB device to the hard disk, the file name will be
the current time USB_YYMMDD_HHMMSS.
