-
-
there is a conflict.
Unless the operation states otherwise, during starting time, if the player
is turned on, the player will escape from the current operation and start the
recording; if the player is turned off, the player will turn on itself and start
recording with the settled file name.
When deleting an entry, you will be prompted with a message for you to
confirm. After confirming, the highlighted entry will be deleted. When deleting
to the last entry, only the default entry will be saved. When successfully deleting
all, all the no. of entry will be refreshed.
Note
(1) When the player acts as a USB device and is connected to the computer
or a USB device is connected to this player, the player will ignore the schedule.
When the player is disconnected from the computer, you will be notified with the
“has non-start entry” message.
(2) When the scheduled recording file size reaches the file size limit, a new
file with the corresponding serial number will be created and continue recording,
this will not affect the recording end time.
(3) If the user selected pause during scheduled recording, the player will
ignore the pause time and will end schedule recording when the ending time is
reached.
(4) When the user changes the time of the clock, the player will ask if the user
wants to delete schedule or not.
(5) When using scheduler, make sure the A/V cable is properly connected,
the TV is on at the scheduled time and the AC adaptor is connected to the player,
then you can use the scheduler to record TV without any problems. When the
recording finishes, the player will shut down according to the time you set for
power off, which can be setup at “Power” in “Setup” interface. Please properly
set the Power off time to increase the player’s lifespan.
(6) If scheduler is setup but did not power up, when you connected the power
and if the scheduler time is already passed, the recording will not start and will
show a “has non-start entry” message.
