-
-
continue, the EXIT button will stop the recording. The RECORD indicator will
flash when the recording is being paused.
▲NOTE:
(1) When the video output signal is PAL, the output resolution will be
720x576 (high, medium, low quality), 352x288 (compress quality). When
the video output signal is NTSC, the output resolution will be 720x480 (high,
medium, low quality), 352x240 (compress quality). When the video output
signal is SECAM, the output resolution will be 720x576 (high, medium, low
quality), 352x288 (compress quality)
(2) You cannot change the display mode while recording or paused
(3) Free space on the hard disk will be detected when the recording starts.
If the free space is less than 100MB, a “Low disk space” window will pop up,
press ENTER to return to DVR main interface. When recording, if the free
space on the hard disk is less than the assigned file size but more than 100MB,
the recording will stop before the hard disk is full. If you want to record when
Hard disk is full, you will be prompted “HDD FULL!”
(4) During long time recording, more than one file will be created, switching
between files will take around 3 sec, frame and sound will not be recorded
during that time
(5) The UP/DOWN button can change preview volume, but will not affect
recording volume, since maximum volume will be used for recording.
(6) Video recording function will ignore auto Power off setting.
6.1.2 Parameters Setup
“Parameters Setup” can change the settings of “Quality” and “File Size
Limit”.
Interface is as shown in the picture:
