![background image](http://html1.mh-extra.com/html/blue-chip/axon-ax-100/axon-ax-100_user-manual_2775492079.webp)
BLUE CHIP
79
User manual AXON AX-100 / AX-100 SB
AXON AX-100 GUITAR TO MIDI CONVERTER
Appendix
FACTORY RESET
Press the PRESET and EXIT buttons together to initialize the AX100
and reset it to the factory settings. This applies to all presets as well,
so be sure to save your work to a sequencer or computer beforehand.
Factory Presets
Presets starting at number 129 have been preprogrammed in ROM at
the factory. We have created these to demonstrate the flexibility and
complexity that your AXON has to offer. You can play with them and
experiment with them at will, and if you want to save any of your
changes to the factory presets, you can do that within the USER area:
1…128. Here is a short description of each of the factory presets:
129. GPno1+HdPad : Simple preset with no split function. Uses a
basic piano sound. Pitchbend has been turned off. For notes played
and bent or slid on your guitar that bend the pitch more than one half
step, a new MIDI Note On event is sent. You can use a hold pedal to
play a pad sound in the background.
130. EPno2+HdPad : Simple preset with no split function. Uses an
electric piano sound. Pitchbend has been turned on, but with pitch
quantize. That meants that for notes played and bent or slid on your
guitar that bend the pitch more than one half step, the pitch jumps in
half step increments. You can use a hold pedal to play a pad sound in
the background.
131. Flute+HdPad : Simple preset with no split function. Uses a basic
flute sound. Pitch quantize is ON and makes realistic trills possible
using string vibrato for example, especially in the higher range. You
can use a hold pedal to play a pad sound in the background.
132. Marmb+HdPad : Simple preset with no split function. Uses a
basic percussion sound. You can use a hold pedal to play a pad sound
in the background.
133.Orgn1+HdPad : Simple preset with no split function. Uses a basic
organ sound. Especially noteworthy here is the parameter “Velocity
Sensitivity” which has been set to 0 (zero) and the Offset belonging
to it to 63. In this case all notes sound with the same velocity (level).
You can use a hold pedal to play a pad sound in the background.