BLUE CHIP
AXON AX-100 GUITAR TO MIDI CONVERTER
28
User manual AXON AX-100 / AX-100 SB
Choose Instrument
Here your determine which MIDI patch/sound will be used for this
split. With your AXON in XG MODE (see Utility Parameters), you
will see all XG (Extended General MIDI) Sound names in your display.
You can make your choice based on instrument group or instrument
name. Press the – Parameter button to place the cursor in the instrument
group box. Choose a random group using the +/- Value buttons. The
selected instrument name will automatically be the first in the sound
group. For our example here, select the group Bass instruments (e.g.:
AkBas). Now press the + Parameter button to select the Bass of your
choice from the group.
BANK MSB / BANK LSB
Bank Select (0...127)
You can select banks with this function, if there is no sound board
build in the AX100.
VOLUME
Volume level (0…127)
Every split allows for an independent volume level that you set here.
Using the +/- Value buttons set the level for your Bass sound to a
value of your choosing.
TRANSPOSE
Transposition (-36…+36)
You can set a pitch offset in half step increments to affect the tuning
for this split. This is a way for you to play notes with your guitar that
you couldn’t normally reach with the guitar alone. For our example
set this value to –12 (–1 octave), so that the Bass will play within its
typical range.
QUANTIZE
Pitch Quantization (AUTO, OFF, ON, TRIGGER)
With this parameter you tell your AXON to execute pitch changes
using your normal pitchbend settings or step-wise (quantized):