![background image](http://html1.mh-extra.com/html/blue-chip/axon-ax-100/axon-ax-100_user-manual_2775492058.webp)
BLUE CHIP
AXON AX-100 GUITAR TO MIDI CONVERTER
58
User manual AXON AX-100 / AX-100 SB
LFO…
Press the ENTER button to edit the individual parameters for the
LFO (Low Frequency Oscillator). The LFO produces low frequency
waveforms that are used to modulate volume, pitch and timbre. Press
the EXIT button to leave this sub menu.
LFO WAVE
(SAW, TRI, S&H)
Select the waveform for the LFO. The kind of modulation applied to
your voice depends on this waveform. Sample & Hold (S&H) creates
a random modulation.
LFO INIT
(OFF, ON)
Setting this parameter to ON resets the LFO at the beginning of every
played note so that each note will have identical modulation. OFF
allows the LFO to modulate freely in an asynchronous manner.
LFO SPEED
(0…63)
Set the speed at which the LFO modulates. Higher values cause the
LFO to modulate faster.
LFO DELAY
(0…127)
This is the delay time after a MIDI Note On event before the LFO is
activated. (This applies only to pitch modulation).
LFO FADETIME
(0…127)
You can program the LFO to begin abruptly or to fade in slowly. The
higher the value here, the more slowly the LFO fades in.
LFO PMD
(0…63)
Pitch Modulation Depth is the value for the amount of pitch
differentiation in the modulation. The higher the value, the wider the
pitches of the modulation swing are apart.