BLUE CHIP
AXON AX-100 GUITAR TO MIDI CONVERTER
46
User manual AXON AX-100 / AX-100 SB
PICK SPLIT 1 and 2
Pick Split 1 and 2 (0…99)
If you use the Pick split option with your Preset, this is where you set
the width of each Pick segment between the bridge and the highest
fret. This area of your guitar is divided into 100 units: 0 is the bridge
and 99 is the top end of the fingerboard. If you want to divide the pick
area into 2 segments, enter the split point for the segment furthest to
the right into the parameter PICK SPLIT 1 (see graphic on front panel).
If you enter the value 50, for example, you divide the pick area into
two segments of equal size, dividing the pick area in the middle. If
you want to divide the pick area into 3 segments, you need to enter a
second value into PICK SPLIT 2 for the split point at the beginning
of the left most segment. If, for example, you want to divide the pick
area of your guitar into 3 equal-sized segments, set the value for PICK
SPLIT 1 to 33 and the value for PICK SPLIT 2 for 66.
REV
Reverb Program (NO EFFECT, HALL1…BASEMENT)
If your AXON is equipped with the optional sound module, you can
use this parameter to choose one of several reverb options. The pro-
gram name then appears in your display. If you don’t want to use
reverb, set this parameter to NO EFFECT.
CHOR
Chorus Program (NO EFFECT, CHORUS1…FLANGER3)
The optional sound module is equipped with numerous chorus options,
from which you can choose here. The name of the program you choose
is shown in the display. Set this parameter to NO EFFECT if you
don’t want to use chorus.
VAR
Variation Program (NO EFFECT, HALL1…AUTOWAH)
The optional sound module is equipped with further variation effects
that can be mixed with reverb or chorus effects. The name of the
chosen variation effect is shown in your display. If you don’t want to
use a variation effect, select NO EFFECT.
For more detailed information about the digital effects in the sound
module and their programmable options, see the chapter UTILITY
MODE.