BLUE CHIP
AXON AX-100 GUITAR TO MIDI CONVERTER
24
User manual AXON AX-100 / AX-100 SB
CC DEFAULTS…
Controller defaults…
In using the various possibilities of control you have using modulation
wheels or, in our case, pick control functionality, it is necessary for
the controller value to be reset to its default value (usually zero) after
a preset change for example. But there are exceptions. The optional
soundboard excpects a standard value of 64 for Controllers 71-74
because these controllers are used as offsets. Because there are
numerous non-standard Controllers available in the MIDI Protocol,
that manufacturers can use at will, your AXON is equipped with the
ability to determine and set the default value for all these controllers.
Press the ENTER button to get to the submenu. In the first line of the
display shows the name and number of the presently selected controller
and in the second line, its default value in hexadecimal format. The
cursor is in the first line and by using the +/- Value buttons, you can
select the controller you want to work with. The + Parameter button
moves the cursor to the second line, and then the default value can be
changed using the +/- Value buttons. The value you enter here will be
saved in a battery-backed-up memory area of your AXON. The table
contains the factory default values. All standardized MIDI controllers
have a default value of zero. Refer to the user manual of MIDI
instrument or module you are using for the default values of any
controller used by the manufacturer and set it here. Use the EXIT
button to leave the Submenu.
MIDI MAPPING:
Program change commands that are received on the selected active
BASIC CHANNEL can be assigned to any AXON presets using this
mapping table. Press the ENTER button.
The first line of the display shows the program number that your
AXON receives; the second line of the display shows the Preset to
which the change will be made. The default setting is the program
change will be sent to the AXON preset with the same program
number. If you want to change this setting, use the +/- VALUE buttons
to change to the appropriate value. Your entry will be immediately
saved in the AXON’s internal battery-backed-up memory, and does
not have to be saved. Use the EXIT button to leave the submenu.
GLOBALS
MIDI MAPPING:...