![background image](http://html1.mh-extra.com/html/blue-chip/axon-ax-100/axon-ax-100_user-manual_2775492045.webp)
BLUE CHIP
45
User manual AXON AX-100 / AX-100 SB
AXON AX-100 GUITAR TO MIDI CONVERTER
Another note for “Insiders”: Normally after using a DATA ENTRY
controller for NRPN or RPN Data, these values are reset to “NULL”
(7fh), so that the DATA ENTRY controller has no more influence.
Your AXON does NOT do this, because this would drastically increase
the amount of MIDI data processed and sent. However, when you
change a Preset, or when you edit an NRPN/RPN, these controllers
ARE set to NULL.
FINGER PICK
Finger picking (OFF, ON)
This parameter allows you to turn on a series of detailed settings that
are particularly valuable for finger picking techniques. In this case
however, you will not have access to the Pick split and Pick control
functions. Make sure that the selected preset does not use Pick split
and that the Pick controller is set to “NO CONTROLLER”.
STRING SPLIT
String Split (1…5)
To implement a string split, enter the first string of the bottom split.
The values are assigned to the strings, 1 being the high E-string. The
value of 4 here means that the two Bass strings (5, 6) are set for the
upper split and the 4 high strings for the lower string split zone.
FRET SPLIT
Fret Split (0 ... 23)
If you are using a fret split in your preset, this parameter defines the
first fret of the left segment (the left split on the front panel graphic).
The frets are numbered starting with the lowest fret (furthest from the
bridge) being fret number 1. Open strings are assigned the value of 0.
The value of 4 means that frets 1 through 3 (including of course open
strings) are assigned to the right split and frets 4 to the highest fret to
the left split zone.