15
16
Operating and Setting Your Multifunction Display
8
1
2
3
4
5
6
11
7 8 9 10
Cleaning the spray arms
Dirt or calcium residue may block the nozzles on the
spray arms. For this reason, regularly check the spray
nozzles.
Lower spray arm
Upper spray arm
1. Remove the lower basket from the machine.
2. Pull off the lower spray arm in an upward direction
( ).
3.
Loosen the fastening screw of the upper spray arm
and pull off the spray arm ( ).
4. Clean the spray arms under running water.
5. Replace the spray arms.
Warning
Ensure that the fastening screws are screwed tight.
Cleaning the filter inset in the water inlet hose
(depending on the model)
Dirt from deposits in the water pipes is prevented by a
filter in the water inlet hose. Check the filter and the water
inlet from time to time.
1. Close the water tap and unscrew the water inlet hose.
2. Take out the filter and clean it under running water.
3. Replace the cleaned filter.
4. Fasten the water inlet hose to the water tap again.
1
A
2
B
12
13
14
a
16 17 18
19
b
c
d
e
15
12
13
14
a
16 17 18
19
b
c
d
e
15
12
13
14
15
16
17
18
19
b
c
d
e
1
2
A
B
1
2
3
4
5
6
Night button
Crystal dry button
Autosense button
High-speed button
Handle
7
8
9
10
11
Start/Stop button
Programme selector knob
Programme button
Multifunction display
On/Off button
Time delay button
Text line in display
Display of remaining time / time delay
Time delay active indicator
Progress indicators
Child lock indicator
Salt indicator
Rinse agent indicator
Indicator for variable motor performance
(mix wash programme)
Dry
End
Pre-wash
Wash
Rinse
a
