23
24
1
Settings (sub-menu)
0
1
0
1
Language
Water hardness
Volume
Brightness
Contrast
Melody
Factory settings
Turkish
English
German
French
Italian
Spanish
Danish
Dutch
Swedish
Languages (sub-menu)
Norwegian
Programme (main menu)
Settings
You can use the Settings programme to select the
language, the water hardness, the signal noise level, the
brightness, the contrast, and the signal melody, or to
reset the dishwasher back to the factory (default) settings.
Calling up the Settings programme:
1. Use the On/Off button to turn the device on.
2. Turn the programme selector knob until Settings is
shown in the multifunction display.
3. To access the programme, press the programme button
.
4. To exit the programme, press the time delay button .
When you have reached the Settings menu item:
1. Press the programme selector knob until the desired
menu item (language, water hardness, volume,
brightness, contrast, or melody) is shown.
2. Use the programme button to access the appropriate
sub-menu.
3. In the sub-menu, turn the programme selector knob
until the desired setting/selection appears.
4. Press the programme button to confirm this setting.
5. Use the Time Delay button to exit the programme.
Menu structure
1 very soft, 2 soft, 3 medium and 4 - hard. For
perfect cleaning and drying results, the dishwasher must
be set to the proper water hardness for your location. To
do this, please also read Softening Water (page 6).
Use the
Volume
programme to select one of five different
sound levels for the signal at the end of the washing
programme: 0 - off, 1 very quiet, 2 - quiet, 3 medium
and 4 - loud.
Use the
Brightness
programme to set the brightness of
the multifunction display within a range of 1 - 9.
Use the
Contrast
programme to set the contrast of the
multifunction display within a range of 0-15.
Use the
Melody
programme to choose one of three
different melodies to signal the end of the washing
programme.
Use the
Factory Settings
programme to set the
dishwasher back to its factory settings:
1. Using the programme selector knob , select "Factory
Settings" in the Settings sub-menu.
2. To access the programme, press the programme button
.
3. Press the programme button to confirm that you
want to set all settings back to the factory settings.
4. Press Time Delay to exit the programme.
The factory settings are:
language = English, water hardness = 3, volume = 3,
brightness = 7, contrast = 5 and melody = 3.
5
4
9
15
3
3
Factory settings?
Settings
Pre-wash
Mini 30' 35°C
Delicate 40°C
Bio 55°C
Economy 50°C
Intensive 70°C
70°C
Mix wash
Settings
Language
Language : German
4
3
1
3
4
5
3
4
5
Factory Settings
5
4
4
You can use the
Language
programme to select one of
nine languages in addition to German: Turkish, English,
French, Italian, Spanish, Danish, Dutch, Swedish or
Norwegian.
Use the
Water Hardness
programme to set the
dishwasher to one of four degrees of water hardness
