27
28
The cleaning results are unsatisfactory
Possible Causes
- Improper loading
- Wrong programme selection
- Sprayer arms are not turning
- Clogged strainers
- Strainers are not placed in their
proper positions
- Sprayer arm nozzles are clogged
- Overloaded baskets
- Detergent Cleaning agent is moist
or clumping
- Too little detergent
- Too little rinse aid
- The lid of the detergent dispenser
remained open.
- Using cutlery with a low-quality
coating
The dishes are not clean
Solutions
- Load the dishwasher as suggested in the directions.
- Select a programme which washes at a higher temperature
or takes longer.
- Check that the sprayer arms can move freely.
- Clean all strainers and filters as described in the manual.
- Check that all strainers and filters are placed in their proper
positions.
- Clean the sprayer arms as described in the manual.
- Clean the sprayer arms as described in the manual.
- Store detergents in a dry location. Close the lid of the
container carefully.
- Increase the amount of detergent as per the programme
table.
- Increase the amount of rinse aid / refill the rinse aid dispenser.
- Always ensure that you close the detergent dispenser lid
after adding the detergent.
- Cutlery of this type is not suitable for washing in dishwashers.
n
Check that the mains plug is properly connected.
n
Are all fuses working?
n
Is the water supply fully turned on?
n
Is the dishwasher door closed firmly?
n
Have you pressed the On/Off button?
n
Is the filter on the water intake and dishwasher
clogged?
Troubleshooting:
9
What to do if the dishwasher will not run
