21
22
Repeat the procedure to turn off the child lock. This
locking mechanism is automatically deactivated when
the programme finishes. The symbol light will then go
out.
The lock does not lock the door, but simply prevents
the programme from being changed.
Cancelling a Programme
To interrupt a programme or a time delay, press the
Start/Stop button for approx. 5 seconds. The button
indicator begins to blink, and the multifunction display
shows "End programme". Once the cancellation process
has been completed, the display shows "End". If you now
wish to select a new programme or function, it will start
at the beginning and not at the stage in the programme
at which the previous programme was stopped.
Depending on when you stopped the wash programme,
there may still be detergent or rinse aid on the dishes.
Child Lock
The programme can be locked while the appliance is
running.
Activate the child lock by pressing the programme button
and the time delay button simultaneously for approx.
3 seconds. The corresponding symbol will be shown
in the multifunction display.
Salt and rinse aid indicators
When the indicators for salt and rinse aid light up,
the respective reservoirs must be refilled.
Warnings
The dishwasher can display various warnings during the
wash cycle.
Programme Progress Display
The multifunction display will show you the stage the
current programme has reached. The status indicators
use the symbols - to indicate which programme
stages have already been started and completed. Only
those programme sections which have been completed
are shown.
The selected programme is only completed when the
symbol lights up, the time remaining is shown as
"00:00", and the multifunction display shows "End".
Additionally, the dishwasher plays a 2-minute melody
when the programme is completed (unless you have shut
off this option; Volume = 0). This signal stops when the
door is opened or any button (except the Start/Stop button)
is pressed.
In the case of the Mini 30' programme, the dishes are
dried by their own residual heat and the drying status
indicator does not light up. The programme is finished
only when the indicators described above appear in the
multifunction display.
Changing the Programme
If you wish to change a programme or an option while
the time delay is active or once the programme has
started, press the Start/Stop button . This deactivates
the time delay. You can now use the programme selector
knob to select another programme or option. Use the
Start/Stop button to start the new programme. However,
the new programme will continue from the point at which
the previous programme was stopped. Options can be
changed only during active time delay, not while a
programme is running.
16
1. Check whether the water supply has been cut off.
2. Check whether the water tap is turned on.
3. If the water supply has not been cut off and the water
tap was not accidentally turned off, please call customer
service.
If this indicator is shown on the multifunction display,
please call customer service (the required information is
shown in the warranty documentation).
Remove the filter and clean it under running water. After
replacing the filter, start the programme again.
a
15
15 e
e
2
3
2
5
4
17
18
Check end filter
Call service
No water !
