Charge on.
BlinkCharging.com
Page 40 of 56
Figure 29. LLM Status
7.5.2.
Gateway/Client Group Table
If the EVSE is Gateway, the following LLM Group Table is present.
Index: The order of the EVSE. The index is first connected to Gateway first showed.
Serial Number: The serial number (EVSE Identity) of each EVSE.
IP: The private local IP address in LLM group of each EVSE.
Wire Type: The power source wire type of each EVSE.
Request: The requested current of each EVSE
PWM: The PWM (charger allowed) current of each EVSE
Phase 1, Phase 2, Phase 3: The real current loaded by the vehicles of each EVSE.
7.5.3.
Operation Mode
There are two different operation modes,
Distribution mode
and
Priority mode
. Each time
when a new coming car is plugged-in and start charging. The LLM gateway will re-calculate the
proper ampere for each charging station. Based on the different mode, the algorithm is different.