Charge on.
BlinkCharging.com
Page 38 of 56
7.4.
Maintenance
The maintenance page is shown below in 30:
Figure 28. Maintenance Screen
7.4.1.
Reboot
Reboot: To restart the EVSE.
Reset Factory Default: This command will restore all settings (e.g. password, network settings,
maximum amperage) to the manufacturer default values.
DIP Switch Reset:
Power off the unit and configure DIP switch into the off position shown below
in figure 30.
Table 13. Reset Factory Default – DIP Switch Configuration
Charging Profile Data
HINT
: Local authorization is defined in OCPP 1.6 specification. There are two local lists: Local
Authorization List and Authorization Cache List. The Local Authorization List is a list of identifiers
